Usually not. 3d …
Usually not. 3d stunt flying requires adjusting pitch from +9 degrees to -9 degrees and infinitely variable during all the flying, so once the tracking is set(at Eyelevel hover speed) it will remain in adjustment.

i have a ? for you. …
i have a ? for you. If you set your pitch up do you still have to track your blades? wont this effect you pitch set up? Thanks!

Thanks very much.
Thanks very much.

good vid A+!!!!!!
good vid A+!!!!!!

If blades arent …
If blades arent tracking,vibration can begin. Also blades should be snug, not too loose. A slight bend in the Main rotor shaft causes vibration too. Blades don't go out of balance very far,so I use a small piece of black electrical tape on the blade. Put it on one, and if vibration gets worse put it on the other. It takes some more tinkering.

thank you for …
thank you for responding. ok i fixed the problem seems the servo dip switch was reversed on my transmitter. the only problem i have now is massive vibration on the head.

the blades are loose enough once it spins up it gets worse is there a way to get rid of this? ive noticed from some posts that it could be the head or blades out of ballance i dont know how to balance them so im at a loss.

the other problem went away with alittle tinkering

Do you have enough …
Do you have enough pitch.? Are the blades spinning the right way. I need more information to help. Make a movie if you can.
Good Luck.

got a ? for you i …
got a ? for you i have a shogun 400 i got from someone i new to helicopters. but i know alittle bit about them.

when i throttle up to 75 percent it wont lift off the servo is workign the head is adjusted to center so i cant understand why it wont take off?

hey thx a lot for …
hey thx a lot for the help. do you think you could pm the tips to me. and thanks again this helped a lot.

6 channel helis …
6 channel helis have more control, but are just as hard to fly as a 4 channel. Study my 9 heli flying tips.

would a 6ch heli be …
would a 6ch heli be much harder to fly than 4ch single rotor?

If you go with any …
If you go with any tail rotored heli, 4 or 6 channel, you will find it extremely more sensitive, as it is windm from the tailrotor that moves it. The tail then can be moved very fast or very slow. But with Coaxial helis, they only yaw by slowing one rotor down at a time using torque to yaw it. They are very easy to fly in comparison. Thanks for the comments.

Hey, nice video. I …
Hey, nice video. I just bought a lama v3 and i learned on it pretty quick. i have no problem with nose in hover or flight. Just wondering do you think moving to a 6ch single rotor heli is to much of a jump from a lama. Or should i go with a 4 ch single rotor heli.

Thanks kindly. Look …
Thanks kindly. Look over you shoulder if you have to and keep the Tx antenna pointing in the direction your plane or heli is flying. It makes it easy and eventually you wont have to. The CP2 would make a good choice next. The blades wont smash into each other, anyway. Tips away in a PM.

Great videos, …
Great videos, Nightflyyer. Along with some 3-ch's, I've been flying my E-sky Lama V3 & V4 for about 3 months and am pleased with how it's going. Only thing I still need to work on is hovering with the heli facing me, and think in reverse fast enough. About the only time I crash is when I push it…Try to maneuver too quickly and the blades clash and down she comes! So, what's my next step? would the ESKY Honey Bee CP2 make sense for me? Also, please PM your 9 heli flying tips? Thx!

Thanks. Nope, you …
Thanks. Nope, you have to compensate with your TX controls with all helis, if you have trimmed it for eyelevel hover. It takes lots of practice. Study my 9 heli flying tips and rules of thumb for more insight. Good luck and thanks for being a fan.

Hi Nightflyer… …
Hi Nightflyer… Great tutorials! Im an avid RC Heli fan, and for my birthday today, I received a Honeybee CP2… Love it! Im trying to follow Radd's tutorial too… is there any tips you can give for avoiding persistent left drift upon takeoff? Im sure its a torque thing… Many thanks from another UK fan…!

thanks very much,i …
thanks very much,i will follow your tips and keep trying,just need to paint and decorate first.ill let you know how i get on!thanks again.

Yes, the are the …
Yes, the are the hardest of all RC models for people to learn on. I will send you my 9 heli flying tips in a PM. Good luck.

i bought an elec …
i bought an elec one the other day £70 its wrecked! my lounge needs redecorating it did my nut right in!

thanks mate.
thanks mate.

I dont know, but I …
I dont know, but I will send you a link in a pm, where you can find out.

nightflyyer how …
nightflyyer how much are blade 400s in the uk do you know?

If you mind, could …
If you mind, could you PM me your 9 heli flying tips, i don't have it. Thx before..

Thanks kindly. …
Thanks kindly. Make sure to read my 9 heli flying tips first and good luck.