August 16, 2008
Fokker f70 / Air Earl rc jet edf 4ch setup
i got this plane from ebay as an airframe and added all the bits. the motors are bruhed and are supposed to pull 110g but im thinking they're pulling 150g each which is awesome seeing as the plane is around 350g rtf. pretty good from a cheap brushed setup. servo's are 9g towerpro. battery is 11.1v 750mah lipo which lasts about 10 minutes on a high speed flight. im thinking of putting nose wheel steering in with a spare servo i have but dont know how i should set it up. some help would be good. thanks.
Duration : 0:1:9
Filed under RC Jets by Ray
Comments on Fokker f70 / Air Earl rc jet edf 4ch setup »
can't u just use …
can't u just use that alieron servo as a nose steering servo at the same time since it's placed on the belly?
As long as the RX …
As long as the RX has a 3 pin input, and your servos/ESC's have 3 pin… They work :\
kterej nedouk to …
kterej nedouk to kameroval?
hey also, did u …
hey also, did u just get some kind of random rc system for ur plane? or did u have to like get one that was compatible with the engines or somethin? cause i just got a though that if i just by some random rc airplane set, than i thought the second i hit the throttle, and engines would overfry.
sweeet, also do the …
sweeet, also do the engines plug into the receiver just like a servo? if they do, is there one cord for each engine or is it just one little cord that plugs into the receiver for both engines? or if theres two, do u have to get a y cable and plug those two cables into one slot on the receiver?
hey mate. you can …
hey mate. you can use pretty much any servo with any reveiver as far as i know.
hey im hoping u …
hey im hoping u help me with something. i just figured out how a remote, receiver, and servo works and how to install it, but i just need to ask u one thing, when i saw i picture of a reciever, it showed some slots for servos to plug into, can u plug any kind of servo in those slots or does it have to be the same brand as the reveiver?
does any one have …
does any one have the ducted fan size, i plan to convert them in full himark brushless one
Thanks for the …
Thanks for the video of your 4 ch conversion, I'm in the process of copying what you have done. Could you make a video of it flying?
Yeah, just put a …
Yeah, just put a y-cable and another servo on the channel you rudder is on and then hook the other servo up to the front wheel.
any ideas on how to …
any ideas on how to set a steering front wheel in?