Turn and burn with the ALL-NEW F/A-18C Electric Ducted Jet from Exceed RC. This EDF jet has everything you ever wanted - high-speed flying, real jet style aerobatics and has one of the BEST low-speed characteristics of any ducted fan airplane ever! Larger than most EDFs and pushers, the F18 has a HUGE presence in the sky.  Exceed RC's high quality foam gives unparalleled durability.  The F18 RTF kit include a ducted fan unit and brushless motor, assembled and balanced. Easy to put together with regular hobby CA and will survive crashes than send balsa and composite planes to the garbage can.  This is simply the BEST LOOKING and MOST ECONOMICAL EDF in its class. Only takes half an hour to put this baby together and you're set to go! 100% Ready to Fly.   Specifications: Wingspan: 780mm (30.70 in) Length: 1160mm (45.66 in) Flying Weight: 850g Wing Area: 12.5dm^2 Wing Load: 68g/dm^2 70mm Ducted Fan (2.75 in) Servos: Five 9G Servos Motor: 2836 Brushless Motor Speed Controller : 45A Power System: 4-Cell 14.8V 2200mAH LiPo Battery ( Charger NOT included ) Radio System: 4-Channel TX and 6CH Rx Highlights: Pre-painted foam main fuselage with pre-installed servos (elevator (2) and aileron), brushless motor and fan, receiver compartment and hatch and ESC Pre-painted foam fuselage front half. Steering servo, battery compartment and hatch and landing gear (including two front wheels) factory installed. Pre-painted foam wings, stabs and fins. Wings and stabs factory hinged Pre-bent main landing gear with wheels factory installed Pre-painted canopy Glue Instruction manual Foam ordinance Miscellaneous building supplies   What the Pro says ! A very nice model, designed by Andy Chen at Starmax.  If you are bored with the performance of the regular 64mm EDF models out there, and are looking for something a little larger, with much higher performance, this is for you. It has a 70mm fan and uses a 4s 2200 lipo, and is capable of 80mph at least right out

powered by Yahoo shopping