September 11, 2008
glow plug tips
a friend of mine has a gas powered rc car that requires a glow plug. the same type we are using, just slightly different shape. see the pictures. just use a different nut and make a slightly smaller lead wire with a smaller bolt and …
Filed under RC Planes by Ray
Comments on glow plug tips »
1993 f250 7.3 block has one broke glow plug tip inside @1 piston?
how do i remove without taking the head off
magnet
References :
you could try cranking the engine over and see if the compression blows it out or remove the injector and and apply shop air through the injector hole and drill through the injector tip or try prying it out with a pick and hopefully all the debris will blow out instead of falling in the cylinder
References :
adolphus has the right idea… but you are probably going
to be removing the head.
References :